NVIDIA GeForce GTX 965M
vs
NVIDIA GeForce GTX 770M

vs

GPU Comparison Result

Below are the results of a comparison of NVIDIA GeForce GTX 965M and NVIDIA GeForce GTX 770M video cards based on key performance characteristics, as well as power consumption and much more.

Advantages

  • Higher Boost Clock: 1150MHz (1150MHz vs 797MHz)
  • More Shading Units: 1024 (1024 vs 960)
  • Newer Launch Date: January 2016 (January 2016 vs May 2013)
  • Larger Memory Size: 3GB (2GB vs 3GB)
  • Higher Bandwidth: 96.19 GB/s (80.19 GB/s vs 96.19 GB/s)

Basic

NVIDIA
Label Name
NVIDIA
January 2016
Launch Date
May 2013
Mobile
Platform
Mobile
GeForce GTX 965M
Model Name
GeForce GTX 770M
GeForce 900M
Generation
GeForce 700M
935MHz
Base Clock
706MHz
1150MHz
Boost Clock
797MHz
MXM-B (3.0)
Bus Interface
MXM-B (3.0)
2,940 million
Transistors
2,540 million
64
TMUs
Texture Mapping Units (TMUs) serve as components of the GPU, which are capable of rotating, scaling, and distorting binary images, and then placing them as textures onto any plane of a given 3D model. This process is called texture mapping.
80
TSMC
Foundry
TSMC
28 nm
Process Size
28 nm
Maxwell 2.0
Architecture
Kepler

Memory Specifications

2GB
Memory Size
3GB
GDDR5
Memory Type
GDDR5
128bit
Memory Bus
The memory bus width refers to the number of bits of data that the video memory can transfer within a single clock cycle. The larger the bus width, the greater the amount of data that can be transmitted instantaneously, making it one of the crucial parameters of video memory. The memory bandwidth is calculated as: Memory Bandwidth = Memory Frequency x Memory Bus Width / 8. Therefore, when the memory frequencies are similar, the memory bus width will determine the size of the memory bandwidth.
192bit
1253MHz
Memory Clock
1002MHz
80.19 GB/s
Bandwidth
Memory bandwidth refers to the data transfer rate between the graphics chip and the video memory. It is measured in bytes per second, and the formula to calculate it is: memory bandwidth = working frequency × memory bus width / 8 bits.
96.19 GB/s

Display and Media

Portable Device Dependent
Outputs
No outputs

Theoretical Performance

36.80 GPixel/s
Pixel Rate
Pixel fill rate refers to the number of pixels a graphics processing unit (GPU) can render per second, measured in MPixels/s (million pixels per second) or GPixels/s (billion pixels per second). It is the most commonly used metric to evaluate the pixel processing performance of a graphics card.
15.94 GPixel/s
73.60 GTexel/s
Texture Rate
Texture fill rate refers to the number of texture map elements (texels) that a GPU can map to pixels in a single second.
63.76 GTexel/s
73.60 GFLOPS
FP64 (double)
An important metric for measuring GPU performance is floating-point computing capability. Double-precision floating-point numbers (64-bit) are required for scientific computing that demands a wide numeric range and high accuracy, while single-precision floating-point numbers (32-bit) are used for common multimedia and graphics processing tasks. Half-precision floating-point numbers (16-bit) are used for applications like machine learning, where lower precision is acceptable.
63.76 GFLOPS
2.402 TFLOPS
FP32 (float)
An important metric for measuring GPU performance is floating-point computing capability. Single-precision floating-point numbers (32-bit) are used for common multimedia and graphics processing tasks, while double-precision floating-point numbers (64-bit) are required for scientific computing that demands a wide numeric range and high accuracy. Half-precision floating-point numbers (16-bit) are used for applications like machine learning, where lower precision is acceptable.
1.561 TFLOPS

Miscellaneous

1024
Shading Units
The most fundamental processing unit is the Streaming Processor (SP), where specific instructions and tasks are executed. GPUs perform parallel computing, which means multiple SPs work simultaneously to process tasks.
960
48 KB (per SMM)
L1 Cache
16 KB (per SMX)
1024KB
L2 Cache
384KB
Unknown
TDP
75W
1.3
Vulkan Version
Vulkan is a cross-platform graphics and compute API by Khronos Group, offering high performance and low CPU overhead. It lets developers control the GPU directly, reduces rendering overhead, and supports multi-threading and multi-core processors.
1.1
3.0
OpenCL Version
3.0
4.6
OpenGL
4.6
5.2
CUDA
3.0
12 (12_1)
DirectX
12 (11_0)
None
Power Connectors
None
32
ROPs
The Raster Operations Pipeline (ROPs) is primarily responsible for handling lighting and reflection calculations in games, as well as managing effects like anti-aliasing (AA), high resolution, smoke, and fire. The more demanding the anti-aliasing and lighting effects in a game, the higher the performance requirements for the ROPs; otherwise, it may result in a sharp drop in frame rate.
24
6.7
Shader Model
5.1

Benchmarks

FP32 (float) / TFLOPS
GeForce GTX 965M
2.402 +54%
GeForce GTX 770M
1.561
Hashcat / H/s
GeForce GTX 965M
93515 +167%
GeForce GTX 770M
35068