AMD Radeon 680M vs AMD Radeon RX 6650M XT
GPU Comparison Result
Below are the results of a comparison of AMD Radeon 680M and AMD Radeon RX 6650M XT video cards based on key performance characteristics, as well as power consumption and much more.
Advantages
- Higher Boost Clock: 2416MHz (2200MHz vs 2416MHz)
- Larger Memory Size: 8GB (System Shared vs 8GB)
- Higher Bandwidth: 256.0 GB/s (System Dependent vs 256.0 GB/s)
- More Shading Units: 2048 (768 vs 2048)
Basic
AMD
Label Name
AMD
January 2022
Launch Date
January 2022
Integrated
Platform
Mobile
Radeon 680M
Model Name
Radeon RX 6650M XT
Navi II IGP
Generation
Mobility Radeon
2000MHz
Base Clock
2068MHz
2200MHz
Boost Clock
2416MHz
PCIe 4.0 x8
Bus Interface
PCIe 4.0 x8
13,100 million
Transistors
11,060 million
12
RT Cores
32
12
Compute Units
32
48
TMUs
?
Texture Mapping Units (TMUs) serve as components of the GPU, which are capable of rotating, scaling, and distorting binary images, and then placing them as textures onto any plane of a given 3D model. This process is called texture mapping.
128
TSMC
Foundry
TSMC
6 nm
Process Size
7 nm
RDNA 2.0
Architecture
RDNA 2.0
Memory Specifications
System Shared
Memory Size
8GB
System Shared
Memory Type
GDDR6
System Shared
Memory Bus
?
The memory bus width refers to the number of bits of data that the video memory can transfer within a single clock cycle. The larger the bus width, the greater the amount of data that can be transmitted instantaneously, making it one of the crucial parameters of video memory. The memory bandwidth is calculated as: Memory Bandwidth = Memory Frequency x Memory Bus Width / 8. Therefore, when the memory frequencies are similar, the memory bus width will determine the size of the memory bandwidth.
128bit
SystemShared
Memory Clock
2000MHz
System Dependent
Bandwidth
?
Memory bandwidth refers to the data transfer rate between the graphics chip and the video memory. It is measured in bytes per second, and the formula to calculate it is: memory bandwidth = working frequency × memory bus width / 8 bits.
256.0 GB/s
Theoretical Performance
70.40 GPixel/s
Pixel Rate
?
Pixel fill rate refers to the number of pixels a graphics processing unit (GPU) can render per second, measured in MPixels/s (million pixels per second) or GPixels/s (billion pixels per second). It is the most commonly used metric to evaluate the pixel processing performance of a graphics card.
154.6 GPixel/s
105.6 GTexel/s
Texture Rate
?
Texture fill rate refers to the number of texture map elements (texels) that a GPU can map to pixels in a single second.
309.2 GTexel/s
6.758 TFLOPS
FP16 (half)
?
An important metric for measuring GPU performance is floating-point computing capability. Half-precision floating-point numbers (16-bit) are used for applications like machine learning, where lower precision is acceptable. Single-precision floating-point numbers (32-bit) are used for common multimedia and graphics processing tasks, while double-precision floating-point numbers (64-bit) are required for scientific computing that demands a wide numeric range and high accuracy.
19.79 TFLOPS
211.2 GFLOPS
FP64 (double)
?
An important metric for measuring GPU performance is floating-point computing capability. Double-precision floating-point numbers (64-bit) are required for scientific computing that demands a wide numeric range and high accuracy, while single-precision floating-point numbers (32-bit) are used for common multimedia and graphics processing tasks. Half-precision floating-point numbers (16-bit) are used for applications like machine learning, where lower precision is acceptable.
618.5 GFLOPS
3.311
TFLOPS
FP32 (float)
?
An important metric for measuring GPU performance is floating-point computing capability. Single-precision floating-point numbers (32-bit) are used for common multimedia and graphics processing tasks, while double-precision floating-point numbers (64-bit) are required for scientific computing that demands a wide numeric range and high accuracy. Half-precision floating-point numbers (16-bit) are used for applications like machine learning, where lower precision is acceptable.
10.094
TFLOPS
Miscellaneous
768
Shading Units
?
The most fundamental processing unit is the Streaming Processor (SP), where specific instructions and tasks are executed. GPUs perform parallel computing, which means multiple SPs work simultaneously to process tasks.
2048
128 KB per Array
L1 Cache
128 KB per Array
2MB
L2 Cache
2MB
50W
TDP
120W
1.3
Vulkan Version
?
Vulkan is a cross-platform graphics and compute API by Khronos Group, offering high performance and low CPU overhead. It lets developers control the GPU directly, reduces rendering overhead, and supports multi-threading and multi-core processors.
1.3
2.0
OpenCL Version
2.1
4.6
OpenGL
4.6
12 Ultimate (12_2)
DirectX
12 Ultimate (12_2)
None
Power Connectors
None
32
ROPs
?
The Raster Operations Pipeline (ROPs) is primarily responsible for handling lighting and reflection calculations in games, as well as managing effects like anti-aliasing (AA), high resolution, smoke, and fire. The more demanding the anti-aliasing and lighting effects in a game, the higher the performance requirements for the ROPs; otherwise, it may result in a sharp drop in frame rate.
64
6.7
Shader Model
6.5
Benchmarks
FP32 (float)
/ TFLOPS
Radeon 680M
3.311
Radeon RX 6650M XT
10.094
+205%
3DMark Time Spy
Radeon 680M
2399
Radeon RX 6650M XT
9283
+287%
